20
Setting Up an Ad-hoc Network in Windows Vista
5.2 Setting Up an Ad-hoc Network in Windows Vista
1. Click the “Start” button.
2. Click on “Connect” or “Establish Connection”.
3. Click on “Set up a connection or network”.
The “Set up a connection or network” option
4. Select “Set up a wireless ad hoc (computer-to-computer)
network” and click “Next”.
The “Set up a wireless ad hoc network” option
5. Follow the wizard’s instructions. A wizard takes you step
by step through the configuration of the ad-hoc network.
N_man_en.fm Seite 20 Freitag, 27. Mai 2016 2:21 14
To Next Page
Loading...
