AVOCOR F Series Quick Start Guide

v.30_05_2018 12
Connecting to an external PC using a VGA
connection
In addition to a VGA connection, a USB touch connection is required when connecting an
external PC.
1. Connect the VGA cable to the VGA port of the touchscreen and to the external PC.
2. Connect the enclosed USB cable to the corresponding touch USB port (USB-B) of the
touchscreen and to the USB port (USB-A) on the external PC.
3. Connect the audio cable to the audio output of the external PC and to the audio
input of the screen.
4. Using the Remote Control select the VGA source button or press the Source Button (see
operating buttons) on the Connect and Control bar to select VGA.
In order for Plug and Play to work correctly, you must
turn on the display before you turn on the connected
computer
.
We recommend using a USB cable that is no longer than
5 metres.

AVOCOR F Series Specifications

General

Brand	AVOCOR
Model	F Series
Category	Monitor
Language	English