AVOURY One - Start-Up; Checking the Tea Maker and Package Contents; Use; Switching on the Tea Maker

PAGE 10
START
Start-up
Checking the tea mak-
er and the package
contents
NOTICE!
Risk of damage!
Carelessness in opening the
packaging with a sharp knife or
other pointed objects may quickly
damage the tea maker.
– Open it very carefully.
1. Remove the tea maker from the
packaging.
2. Check to make sure that all of the
contents have been provided (see
“Device overview” chapter)
3. Check whether the tea maker or
the individual parts are damaged. If
this is the case, do not use the tea
maker. Contact the manufacturer at
the specied service address.
Use
The pods for the tea maker work in a
similar manner to pods for a coee ma-
chine. The size of the pod is determined
by the fact that the tea needs space to
develop during the brewing process. A
sealing lm ensures that the tea in the
pod is protected against loss of its aro-
ma. This sealing lm must be removed
before the pod can be used. There is a
porous net under the sealing lm, which
has either ne mesh or coarse mesh
depending on the neness of the loose
tea. Each pod has a code that tells the
tea maker which parameters the tea re-
quires to provide maximum enjoyment.
Switching on the tea
maker
1. Connect the mains plug with a prop-
erly installed socket.
2. Ensure that the pod compartment
2
is closed.
3. To switch on the tea maker, press
the On/O button
9
. The On/O
button ashes whilst it is starting
up. Once the tea maker is ready, the
On/O button will be illuminated
constantly.
Avoury tea capsules contain ideal porti-
ons of tea for use in the tea machine.
The size of the capsule is determined
by the fact that the tea needs space to
develop during the brewing process. A
lid foil ensures that the tea in the capsule
is protected against loss of its aroma.
This lid foil must be removed before the
capsule can be used. There is a porous
net under the lid foil, which has either
ne mesh or coarse mesh depending
on the neness of the loose tea. Each
capsule has a code that tells the tea
maker which parameters the tea requires
to provide maximum enjoyment.
1. Connect the mains plug with a
properly installed socket.
2. Ensure that the capsule compartment
is closed.
3. To switch on the tea maker, press
the Start-Button / . The Start-
Button / ashes whilst it is
starting up. Once the tea maker is
ready, the Start-Button / will
be illuminated constantly
2
9
Switching on the tea
maker
9
9
NOTICE!
EN
PAGE 31