EasyManuals Logo

Avtech AVH516 Plus User Manual

Avtech AVH516 Plus
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
FREQUENTLY-USED FUNCTIONS
8
4. FREQUENTLY-USED FUNCTIONS
4.1 Key Lock / Unlock
To lock or unlock local operation, click (unlock) or (lock) on the device status bar to change the status
to
(lock) or (unlock).
To unlock local operation, you’ll be prompted to enter the user name and password to access.
Note: The default user name and password are both “admin”, which is the highest user level
Note: Different user level has different access privilege for certain functions. For details, please refer to
“4.3 User Level Creation” at page 9.
4.2 IP Device Search
Note: This function is available only for “SUPERVISOR. To know more details, please refer to “4.3 User
Level Creation” at page 9.
Click (IP Search) to start searching IP camera(s) connected in the same network segment as the recorder
(i.e. 10.1.1.xx by default).
You’ll see the list of every connected IP camera with its connection status to this recorder and MAC address.
IP SEARCH
IP PORT MAC TYPE PROTOCOL STATUS
10.1.1.12 88 00:0e:53:e5:9a:f1 IP CAMERA
AVTECH CONNECTED TO CH1
10.1.1.12 88 UNKNOWN IP CAMERA
ONVIF CONNECTED TO CH1
10.1.1.13 88 00:0e:53:a6:91:18 IP CAMERA
AVTECH CONNECTED TO CH2
10.1.1.13 88 UNKNOWN IP CAMERA
ONVIF CONNECTED TO CH2
10.1.2.14 88 00:0e:53:a5:9f:a2 SWITCH AVTECH UNUSED
10.1.2.14 88 00:0e:53:a5:9f:a2 SWITCH AVTECH UNUSED
10.1.1.15 88 00:0e:53:e1:4e:k5 IP CAMERA
AVTECH CONNECTED TO CH3
10.1.1.15 88 UNKNOWN IP CAMERA
ONVIF CONNECTED TO CH3
10.1.1.16 88 00:0e:53:s5:3e:h6 IP CAMERA
AVTECH CONNECTED TO CH4
10.1.1.16 88 UNKNOWN IP CAMERA
ONVIF CONNECTED TO CH4
10.1.1.17 88 00:0e:53:e6:4b:26
IP CAMERA
AVTECH CONNECTED TO CH5
10.1.1.17 88 UNKNOWN IP CAMERA
ONVIF CONNECTED TO CH5
 CONNECT SETUP EXIT
To fix the camera IP address, or allow the recorder to assign an IP address to your IP camera, select “SETUP”,
and select “STATIC IP “ or “DHCP” for “NETWORK TYPE”.
Click “APPLY” and “EXIT” to save your changes.
SETUP
NETWORK TYPE DHCP
IP 10.1.1.14
PORT 80
USER NAME admin
PASSWORD *****
NETMASK 255.0.0.0
GATEWAY 10.1.1.10
PRIMARY DNS 168.95.1.1
APPLY EXIT

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Avtech AVH516 Plus and is the answer not in the manual?

Avtech AVH516 Plus Specifications

General IconGeneral
BrandAvtech
ModelAVH516 Plus
CategoryNetwork Hardware
LanguageEnglish

Related product manuals