Nicam/bilingual function is only effective in TV mode while program coming with Nicam/
bilingual.
If you can receive Nicam/bilingual signal, you can operate as follows to enjoy that.
You can select Nicam stereo, mono channel
or bilingual through NICAM button on the remote
control. If stereo signal i s too weak, this unit will switch into mono channel automatically.
When selecting mono channel, "MONO" will show on screen; when selecting bilingual
,
"DUAL1" will show on screen; when selecting bilingual II, "DUAL 2" will show on screen
and when selecting stereo, " STEREO " will show on screen.
TV MENU SETUP
14
NICAM/BILINGUAL RECEIVING
N OTE
To Next Page
Loading...
