AWS PNX-203 - Percentage Mode

10
Application Modes
Percentage Mode ( Menu Code: 1.4.1 )
The percentage weighing mode displays the result as a percentage of a reference
sample weight. You can also enter the weight in grams which you want to be 100%.
Action Description Display Status Menu
Level
Press and Hold
[ MENU ]
1. Press and hold the MENU key for 5
seconds.
1.
Press [CAL]
2. Press the CAL key to enter the
Application Mode menu. The counting
menu will be displayed.
1.1
Press [MENU]
Three Times
3. Press the MENU key three times to
change to Percentage Weighing.
1.4
Press [CAL] 4. Press CAL to enter the Percentage
Weighing mode.
1.4.1
Press [CAL]
5. Press CAL to begin weighing the
sample.
1.4.1.1
6. Place the sample on the platform
which will represent 100%
1.4.1.1
Press [CAL] 7. Press CAL to conrm the sample
weight, then remove the sample.
8. You may now place any weight on the
scale to determine its percentage.
Press and Hold
[TARE]
9. Press and hold the TARE key for 2
seconds to exit Percentage Mode.
Manual Input Method
Action Description Display Status Menu
Level
Do steps 1-4 then proceed as follows:
Press [ MENU ]
5. Press menu to change to Manual Input
mode.
1.4.2
Press [CAL]
6. Enter the value in grams that you want
to represent 100%
1.4.2.1
− Press the UNIT key to move the cursor
− Press the PRINT key to increment the number
Press [CAL] 7. Press CAL to conrm the value.
8. Place any item on the platform to
determine its percentage.
Press and Hold
[TARE]
10. Press and hold the TARE key for 2
seconds to exit Percentage Weighing.