AWS PNX-203 - Basic Settings; Unit Settings

11
Basic Settings
Unit Settings ( Menu Code: 2.2 )
The operator can disable any of the weighing units that they do not wish to be
displayed.
Action Description Display Status Menu
Level
Press and Hold
[ MENU ]
1. Press and hold the MENU key for 5
seconds.
1.
Press [MENU]
2. Press the MENU key to change to the
Basic Function Setup menu (BASE).
2
Press [CAL] 3. Press the CAL key to enter the Basic
Function Setup menu.
2.1
Press [MENU] 4. Press the MENU key to change to the
Unit Settings menu.
2.2
Press [CAL]
5. Press CAL key to enter the Unit
Settings menu. The Carat setting will
be displayed.
2.2.1.01
Press [PRINT] 6. Press the PRINT key to toggle the
Carat weighing unit on or o.
2.2.1.01
Press [MENU] 7. Press the MENU key to go to the next
weighing unit - Ounce.
2.2.1.02
Press [PRINT] 8. Press the PRINT key to toggle the
Ounce weighing unit on or o.
2.2.1.02
− Repeat Steps 7-8 to congure all weighing units: ct, oz, ozt, dwt,
GN, lb, N, dr, tlT, tls, tlH, T, T/A/R, /A/R, ms, bat, mom, /lb, kg
Press [CAL] 9. Press the CAL key to conrm
weighing unit settings.
Press [TARE]
Twice
10. Press the TARE key twice to return
to regular weighing mode.