AWS PNX-203 - Balance Setup; Auto-Zero Tracking Range; Stability Range; Sensitivity

15
Balance Setup
Balance Setup ( Menu Code: 4 )
The Balance Setup menu can be used to congure the balance’s weighing
characteristics.
Auto Zero Tracking Range ( Menu Code: 4.1 )
Changes the range that the scale will automatically zero any drifts in weight.
Stability Range ( Menu Code: 4.2 )
Changes the amount of weight change that is allowed for the stability indicator to
remain on.
Sensitivity ( Menu Code: 4.2 )
Changes the scales sensitivity response.
Filtering ( Menu Code: 4.2 )
Changes ltering applied to the weighing result. For stable weighing conditions, you
may choose a lower lter setting. For unstable weighing conditions, use a higher lter
setting.
Action Description Display Status Menu
Level
Press and Hold
[ MENU ]
1. Press and hold the MENU key for 5
seconds.
1.
Press [MENU]
Three Times
2. Press the MENU key three times to
change to the Balance Setup menu
(SETUP).
4.
Press [CAL] 3. Press the CAL key to enter the Balance
Setup menu. The Auto Zero Tracking
Range will be displayed.
4.1
− Press the PRINT key to change the auto zero range:
0.0, 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0
Press [MENU] 4. Press the MENU key to change to the
Stability Range menu.
4.2
− Press the PRINT key to change the stability range:
0.5, 1.0, 1.5, 2.0, 2.5, 3.0
Press [MENU] 5. Press the MENU key to change to the
Sensitivity menu.
4.3.
− Press the PRINT key to change the sensitivity: 1-7
Press [MENU] 6. Press the MENU key to change to the
Filtering menu.
4.4.
− Press the PRINT key to change the ltering: 1-7
Press [CAL] 7. Press the CAL key to to conrm and
return to the previous menu.
4.
Press [TARE]
Twice
8. Press the TARE key twice to return to
regular weighing mode.