AWS PNX-203 - Backlight Setting; Beep Setting

12
Basic Settings
Backlight Setting ( Menu Code: 2.6 )
The operator can change the backlight settings:
Action Description Display Status Menu
Level
Press and Hold
[ MENU ]
1. Press and hold the MENU key for 5
seconds.
1.
Press [MENU] 2. Press the MENU key to change to the
Basic Function Setup menu (BASE).
2.
Press [CAL] 3. Press the CAL key to enter the Basic
Function Setup menu.
2.1
Press [MENU]
Five Times
4. Press the MENU key ve times to
change to the Backlight Settings
menu.
2.6
Press [PRINT] 5. Press the PRINT key to toggle between
the three backlight settings:
2.6
− Backlight ON - Backlight always on
− Backlight OFF - Backlight disabled
− Backlight Auto - Backlight turns on
automatically during weighing
Press [CAL] 6. Press the CAL key to conrm the
backlight settings and return to the
previous menu.
2.
Press [TARE]
Twice
7. Press the TARE key twice to return to
regular weighing mode.
Beep Setting ( Menu Code: 2.7 )
The operator can change the audible beep settings:
Action Description Display Status Menu
Level
Press and Hold
[ MENU ]
1. Press and hold the MENU key for 5
seconds.
1.
Press [MENU] 2. Press the MENU key to change to the
Basic Function Setup menu (BASE).
2.
Press [CAL] 3. Press the CAL key to enter the Basic
Function Setup menu.
2.1
Press [MENU]
Five Times
4. Press the PRINT key to toggle between
the beep on or o.
2.7
Press [CAL] 5. Press the CAL key to conrm the beep
settings and return to the previous
menu.
2.
Press [TARE]
Twice
6. Press the TARE key twice to return to
regular weighing mode.