AWS Snowball User Guide
Transfer Data
At this point, you can change the default network settings through the E Ink display by choosing
Network. To learn more about specifying network settings for the Snowball, see Changing Your IP
Address (p. 49).
Make a note of the IP address shown, because you'll need it to configure the Snowball client.
Important
To prevent corrupting your data, do not disconnect the Snowball or change its network
settings while transferring data.
The Snowball is now connected to your network.
Next: Transfer Data (p. 29)
Transfer Data
Following, you can find information about getting your credentials, downloading and installing the
Snowball client tool, and then transferring data from the Snowball to your on-premises data destination
using the Snowball client.
Topics
• Get Your Credentials (p. 30)
• Install the AWS Snowball Client (p. 31)
29
To Next Page
Loading...