II. Installation of the receiver
This chapter will guide you through the whole installation process of the receiver. Please
read each section carefully to make sure that the system runs properly.
1. Connecting Satellite Cables
The receiver is integrated with one satellite tuner, and one of the first steps is to connect satellite
cable(s) to STB in order to gain optimal signal quality. You can either choose one of the following
connection methods depending on the equipment you have.
A. Connecting Satellite Cables
Connect satellite cable to LNB INPUT.
COMPONENT VIDEO/
AUDIO
ON/OFF
LNB IN
13/18V, 22KHZ
Max 400mA
HDMI LAN USB x 2S/PDIF
DC 12V,3A
To Next Page
Loading...