• Clear Before Scan
YES
is used when you want to delete the existing channel list before you start the automatic
scan. If you want to keep the existing list, select
NO.
Press OK to activate the automatic scan. This will take some minutes. As the scan proceeds, you
will see the progressive bar and the newly found services underneath.
C. Manual Scan of Services
[ : MENU > Setup > Service Searching > Manual Scan]
If you know well enough to configure each exact setting required for manual search
of services, you can do manual scan as well. There are many parameter values that
you need to decide as below.
For DVB-S (Standard Definition) For DVB-S2 (High Definition)
MENU
To Next Page
Loading...