AXE I/O ONE - Technical Specifications; Common and Mic Input Specs; Instrument Input and Line Output Specs

English
18
10 Specifications
Common
AD and DA resolution: 24-bit
Sampling rate: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz and 192 kHz
Host connection: USB Type-C socket
Mic Input
Configuration: Class-A discrete differential microphone preamp, pin 2 hot
Input impedance: 4 kOhms differential
Input level, min gain: 0 dBFS is obtained with a +7 dBu signal at the XLR input
Input level, max gain: 0 dBFS is obtained with a -42 dBu signal at the XLR input
Frequency response: From 9 Hz to 45 kHz within 0.5 dB (96 kHz sample rate)
Dynamic range: 108 dB(A)
THD+N: -104 dB(A) at -10 dBFS
Instrument Input
Configuration: Multiple topology instrument preamp
Input impedance, PASSIVE mode: Variable from 1 MOhms down to 2.2 kOhms
Input impedance, ACTIVE mode: 10 kOhms
Input level, min gain: 0 dBFS is obtained with a +10.5 dBu signal at the TS input
Input level, max gain: 0 dBFS is obtained with a -19 dBu signal at the TS input
Frequency response: From 11 Hz to 45 kHz within 0.5 dB (96 kHz sample rate)
Dynamic range: 108 dB(A)
THD, PURE mode: 0.0018 % (-1 dBFS input)
THD, JFET mode: 0.42 %
Line Outputs 1-2 (Monitor)
Configuration: Electronically balanced
Output impedance: 150 Ohms balanced, 75 Ohms unbalanced
Output level: 0 dBFS corresponds to +12.8 dBu
Frequency response: From 10 Hz to 42 kHz within 0.5 dB (96 kHz sample rate)
Dynamic range: 108 dB(A)
THD @ -1 dBFS: 0.0015%
THD+N: -95 dB(A) at -1 dBFS
Channels 1-2 crosstalk: 109 dB(A)