AXIS P13 Series Installation Guide Page 3
ENGLISH
AXIS P1311,
AXIS P1343 & AXIS P1344
Installation Guide
This installation guide provides instructions for installing an AXIS P1311/P1343/P1344 Network
Camera on your network. For all other aspects of using the product, please see the User’s Manual,
available on the CD included in this package, or from www.axis.com
Installation steps
Follow these steps to install the AXIS P1311/P1343/P1344 on your local network (LAN):
1. Check the package contents against the list below.
2. Hardware overview. See page 4.
3. Install the hardware. See page 5.
4. Assign an IP address. See page 6.
5. Set the password. See page 9.
6. AXIS P1311: Adjust focus. See page 11.
AXIS P1343/P1344: Adjust zoom and focus. See page 13.
Package contents
Item Models/variants/notes
Network camera AXIS P1311
AXIS P1343
AXIS P1344
Indoor power supply
(country specific)
Europe/UK, Australia, USA/Japan, Argentina, Korea
Power block connector 2-pin connector block to provide power to external devices connector
Terminal block connector 4-pin connector block for connecting external devices to the I/O terminal
connector
Camera stand Supplied with mounting screws
CD AXIS Network Video Product CD, including product documentation, installation
tools and other software
Printed Materials AXIS P13 Network Camera Series Installation Guide (this document)
Axis Warranty Document
Extra serial number label
Important!
This product must be used in
compliance with local laws and
regulations.
To Next Page
Loading...
Need help?
General
