Axis C1004-E - Audio Management; Zone and Speaker Setup; Announcements and Standalone Mode

AXISC1004-ENetworkCabinetSpeaker
Audio
Audio
Theaudiosettingscanbeusedtoadjustaudioquality.Youcancongurethefollowing:
•Audiooverview.Seepage10.
•Audiosettings.Seepage1 1.
•Audioclips.SeeAudioClips.
AudioOverview
Connectseveralspeakersintoazone,andmanagemusicplaylists,streams,announcements,schedulingandvolumesettings
fromasinglespeaker.
Logintothespeakerthatyouwanttosetastheleaderinthezone,andconnectalltheotherspeakersasfollowers.
Aboutannouncements
Inthescheduleitispossibletooverlapyourplaylistwithpre-recordedannouncements.Itisalsopossibletodoliveannouncements
whenplayingaplaylist,seeVoiceoverIP(VoIP).
Inbothcasesthemusicwillmuteduringtheannouncement.
Aboutstandalonemode
Thesesettingsareavailableinstandalonemode(nospeakersareaddedintothezone).
Usetheslidertoincreaseordecreasethevolume.
Toidentifythespeaker,clickonthenotetoplayasound.
Howtosetupaspeakersystem(zone)
1.Logintothespeakerthatyouwanttosetastheleaderinthezone.
2.GotoAudio>AudioOverview.
3.ClickEditspeakersystem.
4.Renameyourleaderspeaker:
-Toedittheleaderspeaker,clickthepencil
-Setspeakernameandenterusernameandpassword.
-Ifthesystemsincludesmorethan50speakers,changetoMulticasting.
-ClickApply
5.Addspeakerstothezone:
-UnderAvailablespeakers,clicktheplussigntoaddaspeakertothezone.Ifyourdeviceisnotlisted,click
Adddevicemanuallytoaddthedevice.
-Foreachspeaker:Setspeakernameandenterusernameandpassword.
-ClickApply.
10