Axis Camera Station - Page 39

AXIS Camera Station Administration
AXIS Camera Station User’s Manual 39
Allow clients to update
configuration
Enable this if client users should be allowed to modify the current
configuration from AXIS Camera Station Client. See AXIS Camera Station Client,
on page 58 for more information.
Show only one image
on playback
This setting allows you to view recordings as one large image in the playback
window. If No is selected, the playback window will show the current frame in
the center of the window with the four preceding frames above it and the next
four frames below it.
Sound on alarm Specify the path to and name of the sound file (WAV) to play on alarms. Or
click the search button to go Program Files | Axis Communications | AXIS
Camera Station | Sound to select a new sound file for your alarms.
Enable proxy server Check this option if you want to enable the use of a proxy server. If you have
cameras outside your local network and a proxy server is used for external
network access, you must enable this setting.
Get settings from
Internet Explorer
Click to use the same proxy settings as Internet Explorer.
Proxy server Enter the IP address or name of the proxy server, and port if applicable, e.g.
http://193.168.0.1:3128. Note that you cannot use an address to a script.
User/Password Enter the user and password as defined for your proxy server.
Bypass proxy server for
local addresses
Check this option if you want the browser to the contact servers directly when
accessing local addresses.