Axis Camera Station - Page 44

AXIS Camera Station Administration
44 AXIS Camera Station User’s Manual
Example 1: Configure an alarm received from an INPUT on an AXIS camera or video server
4. Check Enable External Alarm
1. Click Add Alarm
2. Name the alarm
3. Select the new alarm from the list
5. Select AXIS
to detect changes
on an Axis camera
or video server I/O
10. Enter the camera
or video server
IP address,
user name and
password.
8. Enter I/O text
6. Select Input
9. Select Normal Open
or Normal Closed
7. Select I/O
to be used on
camera or
video server.
11. Optional: enter PTZ
12. Enter names that describe I/O status.
Example: Either On or Off is shown in
the I/O status window.
The activation of one I/O can be dependent
the other I/O and the state it should be in
camera preset position.
on another I/O. Check to enable and specify
to activate the first I/O.