Axis D2110-VE - Page 18

AXISD2110-VESecurityRadar
Configureyourdevice
Addscenarios
Ascenario(previouslycalledanincludezone)isanareainwhichmovingobjectswilltriggerrules.Addscenariosifyouwantto
createdifferenteventsfordifferentpartsofthescene.
Addascenario:
1.GotoRadar>Scenarios.
2.ClickAddscenario.
3.Typethenameofthescenario.
4.Selectifyouwanttotriggeronobjectsmovinginanareaoronobjectscrossingaline.
Triggeronobjectsmovinginanarea:
1.SelectObjectmovinginarea.
2.ClickNext.
3.Selectthezonethatshouldbeincludedinthescenario.
Usethemousetomoveandshapethezonesothatitcoversthedesiredpartoftheradarimageorreferencemap.
4.ClickNext.
5.Adddetectionsettings.
5.1Addsecondsuntiltrigger.
5.2Selectwhichobjecttypetotriggeron.
5.3Addarangeforthespeedlimit.
6.ClickSave.
Triggeronobjectscrossingaline:
1.SelectObjectcrossingline.
2.ClickNext.
3.Positionthelineinthescene.
Usethemousetomoveandshapetheline.
4.Tochangethedetectiondirection,turnonChangedirection.
5.ClickNext.
6.Adddetectionsettings.
6.1Addsecondsuntiltrigger.
6.2Selectwhichobjecttypetotriggeron.
6.3Addarangeforthespeedlimit.
7.ClickSave.
Addexcludezones
Excludezonesareareasinwhichmovingobjectswillbeignored.Addexcludezonestoignoreareaswithmovingobjectsthat
couldcausefalsealarms.
18