Axis F41 - Exposure Settings

AXISF41MainUnit
ResettoFactoryDefaultSettings
Important
Resettofactorydefaultshouldbeusedwithcaution.Aresetto
factorydefaultwillresetallsettings,includingtheIPaddress,
tothefactorydefaultvalues.
Note
Theinstallationandmanagementsoftwaretoolsareavailable
fromthesupportpagesonwww.axis.com/techsup
Toresettheproducttothefactorydefaultsettings:
1.Disconnectpowerfromtheproduct.
2.Pressandholdthecontrolbuttonandreconnectpower.See
HardwareOverviewonpage10.
3.Keepthecontrolbuttonpressedfor15–30secondsuntilthe
statusLEDindicatorashesamber.
4.Releasethecontrolbutton.Theprocessiscompletewhenthe
statusLEDindicatorturnsgreen.Theproducthasbeenresetto
thefactorydefaultsettings.IfnoDHCPserverisavailableon
thenetwork,thedefaultIPaddressis192.168.0.90
5.Usingtheinstallationandmanagementsoftwaretools,assign
anIPaddress,setthepassword,andaccessthevideostream.
Itisalsopossibletoresetparameterstofactorydefaultviatheweb
interface.GotoSetup>SystemOptions>Maintenanceandclick
Default.
Furtherinformation
•Forthelatestversionofthisdocument,seewww.axis.com
•Theusermanualisavailableatwww.axis.com
•Tocheckifthereisupdatedrmwareavailableforyour
product,seewww.axis.com/support
•Forusefulonlinetrainingsandwebinars,see
www.axis.com/academy
22