AXIS M11 Series Page 7
ENGLISH
AXIS IP Utility - single camera/small installation
AXIS IP Utility
automatically
discovers and displays
Axis devices on your
network. You can also
manually set a static IP
address through this application. AXIS IP Utility is available on the Axis
Network Video Product CD, or it can be downloaded from www.axis.com/
techsup
Install the AXIS M11 Series Network Camera on the same network
segment (physical subnet) as the computer running AXIS IP Utility.
Automatic discovery
1. Check that the AXIS M11 Series Network Camera is connected to
the network and that power has been applied.
2. Start AXIS IP Utility.
3. When the AXIS M11 Series network camera appears in the window,
double-click to open the camera’s home page.
4. See page 9 for instructions on how to set the password.
Set the IP address manually (optional)
1. Acquire an unused IP address on the same network segment your
computer is connected to.
2. Select the AXIS M11 Series in the list.
3. Click the button Assign new IP address to selected device and
enter the IP address.
4. Click the Assign button and follow on-screen instructions. Note
that the camera must be restarted within two minutes for the new
IP address to be set.
5. Click the Home Page button to access the camera’s web pages.
6. See page 9 for instructions on how to set the password.
To Next Page
Loading...
Need help?
General
