31
AXIS M3011 - System Options
RTP
RTP/ MPEG-4 & H.264 - These settings are the port range, IP address, port number (video), and Time-To-Live value to use
for the video stream(s) in multicast MPEG-4 and H.264 format. Only certain IP addresses and port numbers should be used for
multicast streams. For more information, please see the online help
.
Bonjour
The network cameras include support for Bonjour. When enabled, the camera is automatically detected by operating systems
and clients that support this.
LED
For a listing of all LED behavior, see page 6, or the online help . Note that the LED does not flash when the stream is
retrieved using multicast.
Maintenance
• Restart - the camera is restarted without changing any settings.
• Restore - the unit is restarted and most current settings are reset to factory default values. The settings that do not
reset are:
• the boot protocol (DHCP or static)
• the static IP address
• the default router
• the subnet mask
• the product interface language
• Default - the default button should be used with caution. Pressing this returns the camera's settings to the factory
default values (including the IP address).
Upgrade Server - See Upgrading the Firmware, on page 34.
Support
The Support Overview page provides valuable information on troubleshooting and contact information, should you require
technical assistance.
System Overview provides an overview of the camera’s status and settings. Information that can be found here includes the
camera’s firmware version, IP address, security, event and image settings and recent log items. Many of the captions are also
links to the proper Setup page to conveniently make adjustments in the camera’s settings.
To Next Page
Loading...
Need help?
General
