Axis P1343-E - Detectors; Camera Tampering; Motion Detection

To Next Page

To Previous Page

AXIS P1343-E Network Camera

Detectors

Camera Tampering

Camera Tampering can generate an alarm whenever the camera is repositioned, or when the lens is covered, sprayed or severely

defocused. To send an alarm, for example an email, an action rule must be set up.

To conﬁgure tampering:

1. Go to Detectors > Camera Tampering.

2. Set the Minimum duration, that is, the time that must elapse b efore an alarm is generated. This can help prevent f als e

alarms for known conditions that affect the image.

3. Select Alarm for dark images if an alarm should be generated if lights are dimmed or turned off, or if the lens is sprayed,

covered, or rendered severely out of focus.

4. Click Save.

To conﬁgure the product to send an alarm when tampering occurs:

1. Go to Events > Action Rules.

2. Click Add to set up a new action rule.

3. Enter a Name for the action rule.

4. Under Condition,selectDetectors from the Trigger list.

5. Select Tampering from the list of detectors.

6. Optionally, select a schedule and set additional conditions.

7. Select the action. To send an email, select Send Notiﬁcation a

nd select a Recipient from the list of deﬁned rec ipients.

Note

The While the rule is active option under Duration canno t be used with camera tamp ering, since camera tampering does not

have a duration and once it has been triggered it will not automatically return to its untrigge re d state.

For more information o n actions rules, s ee Events, on page 35.

Motion Detection

Motiondetectionisusedtogenerateanalarmwhenevermovementoccurs(orstops)intheview.Upto10IncludeandExclude

windows can be conﬁgured:

• Include windows — target speciﬁc a reas within the whole video image

• Exclude windows —deﬁne areas w ithin an Include window that should b e ignored (areas outside Include windows

re automatically ignored)

Once conﬁgured, motion detection windows appear in the list of De t ectors in Action rule setup. See Setting Up an Action Rule, on

page 35.

Note

Using the motion detection feature may decrease the prod uct’s overall performance.

Other manuals for Axis P1343-E