Axis P3818-PVE - Page 11

To Next Page

To Previous Page

AXISP3818-PVENetworkCamera

Conﬁgureyourdevice

Note

Ifyouupdatetheoverlaytextitwillbeautomaticallyupdatedonallvideostreamsdynamically.

Recordvideowhenthecameradetectsloudnoises

ThisexampleexplainshowtosetupthecameratostartrecordingtotheSDcardvesecondsbeforeitdetectsloudnoiseandto

stoponeminuteafter.

Turnonaudio:

1.Setupthestreamproletoincludeaudio,seeAddaudiotoyourrecordingonpage16.

Turnonaudiodetection:

1.GotoSystem>Detectors>Audiodetection.

2.Adjustthesoundlevelaccordingtoyourneeds.

Createarule:

1.GotoSystem>Eventsandaddarule.

2.Typeanamefortherule.

3.Inthelistofconditions,underAudio,selectAudioDetection.

4.Inthelistofactions,underRecordings,selectRecordvideo.

5.Inthelistofstorageoptions,selectSD_DISK.

6.Selectthestreamprolewhereaudiohasbeenturnedon.

7.Settheprebuffertimeto5seconds.

8.Setthepostbuffertimeto60seconds.

9.ClickSave.

Recordvideowhenthecameradetectsimpact

Shockdetectionallowsthecameratodetecttamperingcausedbyvibrationsorshock.Vibrationsduetotheenvironmentortoan

objectcantriggeranactiondependingontheshocksensitivityrange,whichcanbesetfrom0to100.Inthisscenario,someoneis

throwingrocksatthecameraafterhoursandyouwouldliketogetavideoclipoftheevent.

Turnonshockdetection:

1.GotoSystem>Detectors>Shockdetection.

2.Turnonshockdetection,andsetavaluefortheshocksensitivity.

Createarule:

3.GotoSystem>Events>Rulesandaddarule.

4.Typeanamefortherule.

5.Inthelistofconditions,underDevicestatus,selectShockdetected.

6.Click+toaddasecondcondition.

7.Inthelistofconditions,underScheduledandrecurring,selectScheduledevent.

8.Inthelistofschedules,selectAfterhours.

9.Inthelistofactions,underRecordings,selectRecordvideowhiletheruleisactive.

Other manuals for Axis P3818-PVE