Need help?Do you have a question about the Axis Q6000-E Series and is the answer not in the manual?
General| Sensor Type | CMOS |
|---|---|
| Weather Resistance | IP66 |
| Impact Protection | IK10 |
| Camera Type | IP Camera |
| Resolution | 1920x1080 |
| Pan/Tilt/Zoom | Pan: 360° continuous, Tilt: 180° |
| Day/Night | Yes |
| Compression | H.264, MJPEG |
| Ethernet Port | Yes |
| Power | PoE+ (IEEE 802.3at) |
| Operating Temperature | -30°C to 50°C |
| Weight | 4.5 kg |
Explains how repainting affects product warranty conditions and approved procedures.
Details potential risks during disassembly, repainting, and assembly, such as ESD damage and dust contamination.
Outlines necessary disassembly and cleaning steps before the repainting process.
Provides guidance on surface preparation for different materials to ensure proper paint adhesion.
Details the step-by-step process for disassembling the camera unit for repainting.
Describes the masking, spray application, and drying process for applying new paint to the product.
Guides users on how to reassemble the camera unit after the repainting process is complete.
To Next Page
