Axis Q6000-E Series User Manual

AXISQ6000–EPTZNetworkCameraSeries
Howtorepainttheproduct
Howtorepainttheproduct
Preparations
•Ifapplicable,disassembletheequipmentaccordingtotheinstructionsinthisdocument.
•Removegaskets,screws,electricalcomponents,connectorsandplugs,windows,anddomesfromthepartstoberepainted.
•Cleanallpartstoberepaintedthoroughlytoremovegrease,dust,oroil.
•Toensurereassemblyandfunctionalityoftheproduct,maskopeningsforscrews,LEDindicators,ormicrophonesbefore
painting.
Pretreatmentofparts
Dependingonthepartmaterialandtypeofpaintappliedatfactory,differentpretreatmentshouldbedoneforthenewpaintto
adhereaswellaspossible.Cleanthepartsproperlytoremoveoil,greaseanddust.
Formoreinformationonthematerialsusedintheproduct,seeitsdatasheetatwww.axis.com
Powdercoatedparts-Usingnesandpaper,removetheoriginalpowdercoatingdowntothebasematerialandcleantheparts
beforepainting,oruseaprimer.
Anodisedandchromatedparts-Useaprimer.
Uncoatedstainlesssteel-Nospecialpretreatmentisneeded,butmakesurethatthesurfaceiscleanbeforepainting.
Plastic-Useaprimer.
3

Axis Q6000-E Series Specifications

General

Sensor Type	CMOS
Weather Resistance	IP66
Impact Protection	IK10
Camera Type	IP Camera
Resolution	1920x1080
Pan/Tilt/Zoom	Pan: 360° continuous, Tilt: 180°
Day/Night	Yes
Compression	H.264, MJPEG
Ethernet Port	Yes
Power	PoE+ (IEEE 802.3at)
Operating Temperature	-30°C to 50°C
Weight	4.5 kg