Axis S22 Series - Configure DHCP Server; Configure SNMP

AXISCameraStationS22ApplianceSeries
Managethebuilt-inswitch
2.Selectthecountryandtimezone.
3.Tosetthetimemanually,selectManualandmanuallyadjustthetime.
4.TosetupanNTPserver,selectNTPserverandentertheNTPserveraddress.
Note
NTPonlyworkswhentheswitchisconnectedtoanetworkandconguredwithInternetaccess.
5.ClickSave.
CongureDHCPserver
Important
Iftheswitch’sDHCPserverisenabledandyourAXISCameraStationS22Applianceisconnectedtoanexternalnetworkwith
itsownDHCPserver,youwillhaveIPaddressconicts.Thismightresultinthecorporatenetworknotworking.
YoucanconguretheswitchtouseitsinternalDHCPserverforassigningIPaddressestoconnecteddevices.Whenyouusethe
switchuplinkconnectiontoallowdevicestoaccessorbeingaccessedbyexternalapplication,youmustspecifythegateway
andDNSaddresses.
1.Intheswitch’smanagementpage,gotoSettings>DHCPserver.
2.SelectUseDHCPserver.
3.EnterthestartIPaddress,endIPaddress,subnetmask,gateway,DNS1,DNS2,leaselength,anddomainname.
4.ClickSave.
CongureSNMP
1.Intheswitch’smanagementpage,gotoSettings>SNMP.
2.Entertheservername,contact,andlocationusedfortheSNMPconnection.
3.IfyouwanttouseSNMPV1orSNMPV2c,selectSNMPV1/SNMPV2candenterthereadcommunity.
4.IfyouwanttouseSNMPV3,selectSNMPV3(MD5)andentertheusernameandpassword.
Note
CurrentlyweonlysupportMD5authenticationusedforSNMP.
5.ClickSave.
Congurewebsettings
1.Intheswitch’smanagementpage,gotoSettings>Websettings.
2.Entertheportnumber.
3.Formoresecureconnection,selectSecureconnection(HTTPS)andentertheportnumberusedforHTTPSconnection.
4.ClickSave.
Important
Ifyouhavechangedtheportnumber,ensureyourecordthenewportnumber.Ifyou’veforgottenthenewportnumber,
contactAxissupport.
37