Axminster Bandsaw - Page 17

Illustration and Parts Description
17
Continues Over....
Upper bearing blade guides (A)
Blade guide adjusting knob (B)
Blade guide fore and aft clamping screw (C)
Upper blade thrust bearing (A)
Clamping screw (B)
Guide assembly clamping screw (C)
Table level angle bracket
with adjustable stop
bolt for 90˚
Lower bearing blade guides (A), Blade guide adjusting knob (B),
Blade guide fore and aft clamping screw (C)
Lower wheel blade brushes
Rear thrust bearing (A), Rear thrust bearing clamping screw (B),
Lower blade guide assembly clamping screw (C)
Lower wheel brush
AB
C
C
B
A
A
B
C
A
B
C