Axvue HD-992 User Manual

× 3
keep the distance
between sensor and body
at least 0.6 inch for
accurate temperature
result
0.6 in
Step 3:
３
1. Night-Vision LED
2. Lens
3. Temperature Sensor
4. Microphone
5. Speaker
6. Power/Code
7. DC Jack
8. Wall Mounng Hole
Please charge the battery for at least 8 hours before
using the product.
Step 1: Test recepon first, put the camera in a suitable place that
will provide you the best view of your baby in the crib (Note: Do
not hang up the camera firmly unl the inial installaon test is
completed). Plug the adapter into the wall outlet and turn on the
camera.
Step 2: Turn on the monitor by pressing and holding the Power /
Video“ ” buon for 5 seconds unl “axvue” shows up, then
the video will show up on the screen immediately. If the video
does not show up, please refer to “TO PAIR MONITOR AND
CAMERA (ADD CAMERA)” on the next page. If the video shows
up, the inial installaon test is completed, then you can set up
the camera according to the instrucon below.
Set Up Camera: Place the camera on a flat surface, such as a
wardrobe or shelf (Figure 1). Or hang it on the wall (Figure 2). No
maer wherever to place the camera, please make sure to keep it
away from the crib for at least 3 feet and all power cords should be
placed behind the camera properly. Then adjust the angle of the
camera lens unl the enre crib shows up on the display, or adjust
it to the best angle that you think to watch your baby.
Turn on the monitor by pressing
and holding Power / Video
“ ” buon for 5 seconds.
Make sure the power adapter is plugged into
camera and turn on the camera by pressing
Power / Code“ ” buon for 3 seconds.
Step 4:
Get to know us at: www.axvue.com
SETUP & USE
INSTRUCTION MANUAL
Model- HD992
Revised at 9/2020
THIS PRODUCT CAN NOT SUBSTITUE PARENT’S SUPERVISION ON YOUR CHILD.
WARNING
WARNING
BATTERY WARNING
Step 2:
Adapters:
FEATURES & COMPONENTS
Camera:
× 1 × 2
Monitor:
3 feet
Figure 1
3 feet
Figure 2
TO USE PORTABLE / BATTERY MODE
Step 1: Charge the baery for at least 8 hours before using portable / baery mode.
Step 2: Make sure the adapter is plugged into the camera.
Step 3: The baery life can be up to 15 hours if it is fully charged.
Baery life will be shortened if recharging it connuously. Unplug the power adapter when you are
not using it for a long me.
Please charge the baery for 6
~
8 hours before using the product.
The monitor and camera are paired before shipment. If it is unpaired for some reason, please refer
to the following steps:
TO PAIR MONITOR AND CAMERA (ADD CAMERA)
Step 1: Make sure the camera and monitor are in the same place.
OK
3
2
OK
5
1
6
OK
7
Power & Low Baery Sound Lights
*LED
1. LED
2. MENU
3. Pan / Tilt
4. Moon Detecon
5. Zoom / Talk Back (OK)
6. Volume
7. Brightness
8. Cam / Split
9. VOX
10. Microphone
11. Speaker
12. Baery Compartment
13. Kickstand
14. Power / Video
15. DC Jack
4
Step 1: Place the monitor display in the living room, bedroom or any place you want to watch your
baby. Use an adapter to connect the camera with an electrical outlet.
Step 2: Turn on the monitor by pressing the Power / Video“ ” buon for 5 seconds unl axvue
logo or video shows up on the screen.
Step 3: Press Power / Video“ ” buon to turn off the video if you only need to hear the voice.
Step 4: Turn off the monitor completely by pressing and holding the Power / Video“ ” buon
for 5 seconds.
TO USE PLUGGED-IN MODE
Please read the following instrucons and warnings carefully
Keep this instrucon manual for the future.
For technical support see the FAQ page.
For adult use only.
- Store this product out of the reach of babies (at least 3 feets (0.9 m) away from the crib). A strap
wound around the baby’s neck may result in asphyxiaon. Use a safety clip to clamp the power cord
and keep it out of baby’s reach. Do not use other extension cords. Only use the power adapter
provided.
- Do not touch the exposed part if the adapter is connected with power.
- Test regularly before inial use or when change the posion of camera.
- Avoid placing the product in humid place or contacng with liquid. (such as bathtub, sink, etc.)
- Do not apply heat to the product.(such as stoves, radiators, etc.)
- Using the product in venlated place. Avoid placing it on sofas, cushions, beds or other places which
may block venlaon.
- The product only can be operated by adult. Do not allow baby to play with it. Tiny accessories are
contained, please be careful when unpack and install it.
- Only use the recommended rechargeable baery. Please contact us if you need to change it.
- For the contact list, please refer to the last page of the instrucon.
- Please clean the baery compartment before using it.
- Avoid short circuits the power supply terminal.
- Remove the baery when you are not using it or when running out of power.
- Keep the baery away from children.
- Dispose of the empty baery properly.
Asphyxiaon Danger: Store this product out of the reach of babies (at least 3 feet away from the
crib). A strap wound around the baby’s neck may result in asphyxiaon. Use a safety clip to clamp the
power cord and keep it out of baby’s reach. Do not use other extension cords. Only use the power
adapter provided.
AXVUE HD992 VIDEO BABY MONITOR
WITH 5" HD LCD SCREEN & 2 CAMERAS
× 2 × 2
× 12

Axvue HD-992 Specifications

General

Brand	Axvue
Model	HD-992
Category	Baby Monitor
Language	English