Axxess ASWC User Manual

axxessinterface.com 800.221.0932
USB PORT COVER PROGRAMMING LED
RESET BUTTON
PIN
1
PIN
2
PIN
3
PIN
4
PIN
5
PIN
6
PIN
12
PIN
11
PIN
10
PIN
9
PIN
8
PIN
7
A brief overview of the ASWC interface and wire harness:
On the top of the ASWC interface there are three points of interest:
1)TheProgrammingled–thiswillashrapidlywheninautodetectmode,ashesslowlyinmanual
programming mode
2) The Reset button – Hold down button more then 2 seconds but less then 10 seconds to start auto
detect mode; hold down longer then 10 seconds to start manual programming mode
3) The slide cover for the USB update port – open this up to reveal the USB update port. Using the
USB-CAB update cable and the Axxess website you can make sure you always have the latest,
updated inventory.
Below are the wire colors of the ASWC. Please go to the Axxess website (www.axxessinterface.com)
fordetailedinformationonyourspecicvehicleandwhatcolorwire(s)touseontheASWC.
Pin 1 – Pink
Pin 2 – White/Green
Pin 3 – Orange/Green
Pin 4 – Green/Orange
Pin 5 – Gray/Red
Pin 6 – Black
Pin 7 – Blue/Pink
Pin 8 – Black/Green
Pin 9 – White (Ring of 3.5mm connector)
Pin 10 – Red (Tip of 3.5mm connector)
Pin 11 – Gray/Blue
Pin 12 – Red
Wire Insertion View

Axxess ASWC Specifications

General

Type	Steering Wheel Control Interface
Updateable	Yes
Programming	Automatic or manual programming options
Installation	Plug-and-play installation with vehicle-specific harness
Functionality	Retains steering wheel control functions
Vehicle Coverage	Covers a wide range of vehicles
Connector Type	Vehicle-specific wiring harness
Firmware Updates	Yes