8180
appliance to a suitable place, remove the drain plug, drain water
completely. After the drain, re-install the plug, or the appliance
may leak and make your room wet. If the unit is placed in a position
admitting drain water, you also can connect the drain hose to the
drain port to drain water.
MAINTENANCE
Appliance maintenance
• Cut of the power supply.
• Turn off the appliance rst before disconnecting from power supply
• Wipe with a soft and dry cloth.
• Use lukewarm water (below 40
℃
) to clean if the appliance is very
dirty.
• Never use volatile substance such as gasoline or polishing powder
to clean the appliance.
• Never sprinkle water onto the main unit. Dangerous! Electric shock!
AIR FILTER MAINTENANCE
It is necessary to clean the air lter after using it for about 100 hours.
Clean as follows:
• Stop the appliance and remove the air lter.
• Clean and reinstall the air lter.
• If the dirt is conspicuous, wash it with a solution of detergent in
lukewarm water. After cleaning, dry in the shades and cool place,
then reinstall it.
• Clean the air lter every two weeks if the air conditioner operates in
an extremely dusty environment.
MAINTENANCE AFTER USING
• If the appliance will not be used for a long time, be sure to pull out
the primary and the secondary rubber plug of the drain port, in
order to drain the water.
• Keeps the appliance running with fan only for a half day during
a sunny day to dry the appliance inside and prevent from going
moldy.
• Stop the appliance and pull out the power supply plug, then take out
the batteries of remote controller and store appliance properly.
• Clean the air lter and reinstall it.
• Remove air hoses and store them properly, and cover the hole
tightly.
To Next Page
Loading...
