ii
Installation Precautions
WARNING
The weight of this product may exceed 10 kg, depending on the model. When transporting or
installing this product, wear safety shoes and use a transportation device or have two or more workers
carefully carry the product. If the product is raised or dropped carelessly, personal injury or damage to
the product may occur.
Be sure to hold the chain when installing the product with the weight attached. Do not hold the
hollow cable, since it is slippery and holding it may result in an accident.
Install this product in a location where the operating conditions (pressure rating, temperature,
humidity, voltage ( specification sheet), mounting orientation, and ambient atmosphere
( Chapter 3 Installation) are satisfied. Failure to do so may cause a fire or malfunction.
Only specialists should do the installation and wiring work. Otherwise a fire or electric shock may result.
"Specialists" are those who are skilled in instrumentation and electrical work.
CAUTION
After installing this product, do not use it as a scaffold or put your weight on it. Doing so may damage
the product.
Be careful to avoid impact to the glass part of the display from tools, etc. Otherwise, damage to the
product or personal injury may result.
Perform the grounding work in the correct manner in accordance with the instructions in this manual.
Incorrect grounding may adversely affect the output or cause a malfunction.
Do not subject the product to any type of shock or impact. Doing so may damage the device.
Use a power supply with an overcurrent protection function (overcurrent value: 50 mA or less).
Do not install the probe in a location where the water current is strong or where there is vibration.
Doing so may cause an output error.
Cautions regarding Safe Work
To Next Page
Loading...