9-11
Chapter 9 Maintenance and Inspection
Assembling the Junction Box
y
Assembling the Hollow Cable
(1) Tighten the shell with a wrench to secure it to the connection port at the lower right
portion of the junction box.
Tightening torque: 4.0 ± 0.5 N·m
Fig. 9-17. Assembling the shell
(2) Pass the gland, washer, and gasket through the hollow cable.
Fig. 9-18. Mounting the gland, washer, and gasket
Shell
Gasket Washer Gland
To Next Page
Loading...