Azbil Corporation
Model: AMT, HDT - CV3000 Series Control Valves
4
1.4 Nameplate
A nameplate as shown in Fig. 1-3 is posted on each control valve. The nameplate
indicates the model number, valve size, pressure rating, trim material, date of
manufacture and other major specifications of the control valve. Before installing
the control valve, make sure that the specifications indicated on the nameplate
conform with the conditions of use. The nameplate indicate also the product number
(PROD.NO.) of the control valve. Please mention this number also when consulting
your Azbil Corporation agent for replacement of parts or other modification of the
control valve.
Fig. 1-3 Nameplate
Compliance with Regulations
This product complies with the directive below.
• Pressure Equipment Directive (PED) 2014/63/EU
Requirements for workers (installation, operation, maintenance)
To ensure safety, only specialists who are skilled in instrumentation work should
carry out the installation, operation, and maintenance of this device.
To Next Page
Loading...
