Global button throttle. In case one or more of the buttons are starting to
make double clicks (switch debounce), you can setup button throttle here
in milliseconds. That is the time that must pass between keypad will
register next keypress on the same button.
Note! The button throttle currently works on all buttons in the same
time, it can’t be setup separately for each button.
Analog joystick hardware calibration. Here you can reset the deadzones
to zero values or Calibrate the thumbstick to optimal settings. When
calibrating, carefully follow the instructions on screen. See more
information at 5.1. CALIBRATING THUMBSTICK
Version information. Here you can see what software and firmware you
are using.
To Next Page
Loading...