Aztech HL117 E

User Manual
Page 25 of 43
Getting Started
Setting up the device is easy. The flowchart below provides an outline of the steps you need to
complete the installation. There are brief descriptions beside each step to help you along. Detailed
instructions are provided in the subsequent pages.
Setup the
HomePlug AVs
Plan your Network
Ready to Use
(Optional)
Install HomePlug
AV Utility Software
Use an Ethernet cable to connect
HomePlug AV to your computer or
Ethernet device.
Install HomePlug AV Utility to
apply manual configuration
changes and monitor device
activity.