User Manual
Page 28 of 43
Media Network
Realize your high tech lifestyle by converging your IP devices into a single network.
Setup the HomePlug AVs
For Twin Pack
HomePlug AVs from a Twin Pack are preconfigured to have a common Private Network Name unique
for that pair. All you need to do is connect the HomePlug AVs to an Ethernet device and then plug
it to a wall socket.
To setup a pair of HomePlug AVs:
1. Plug one end of the Ethernet cable to your Ethernet device and then connect the other end
to HomePlug AV.
2. Connect the HomePlug AV to a wall socket.
3. Plug one end of the Ethernet cable to your other Ethernet device and then connect the
other end to HomePlug AV.
To Next Page
Loading...
Need help?
General
