Aztech HL117 E User Manual

User Manual
Page 40 of 43
Firmware Upgrade
Use Firmware Upgrade to upgrade firmware of HomePlug AV. After upgrading the firmware,
HomePlug AV will still retain the same Private Network Name and MAC address settings. Before you
proceed with the upgrade, you need to have both the configuration file (PIB extension) and the
firmware file (NVM extension). You can download upgrade files from the product’s Web site.
Firmware Upgrade
Firmware UpgradeFirmware Upgrade
Firmware Upgrade
To upgrade the firmware of a HomePlug AV:
1. Connect HomePlug AV to the computer where you are using HomePlug AV Utility.
2. Open HomePlug AV Utility.
3. Click Firmware Upgrade.
4. Click Browse to select the location of the configuration and firmware files. The
configuration file has a PIB extension while the firmware file has an NVM extension. After
you select the location of the configuration and firmware files, the upgrade will
immediately start.
To reset to factory default:
1. Connect HomePlug AV to the computer where you are using HomePlug AV Utility.
2. Open HomePlug AV Utility.
3. Click Factory Default.

Aztech HL117 E Specifications

General

Brand	Aztech
Model	HL117 E
Category	Adapter
Language	English