User Manual
Page 33 of 43
Home
Home provides a list of all the possible tasks you can perform in the HomePlug AV Utility. To start a
task, you first need to select the network card connected to your HomePlug AV. This is most helpful
when you have more than one network card in your computer. When you select a network card, the
MAC Address of the HomePlug AV connected to your computer appears. If there is no HomePlug AV
connected to your computer, no MAC address will appear.
After selecting the network card, there are four possible tasks you can perform. These tasks
include:
• Change the Private Network Name
• Change the QoS settings
• View devices in the network
• Upgrade the firmware
When you select any task, you will be forwarded to the tab for the selected task.
Home
HomeHome
Home
To Next Page
Loading...
