will be disabld.
7.2 Network Setting Page
7.2.1 Basic Network Setting
Figure 19
1） LAN Setting: The default setting of this equipment is showed as above Figure 19, user
can change it according to your network environment.
2） HTTP Port: The IP address Identifies one IP camera in the network, you can run several
programs on this equipment, and every program will transfer the data through some port,
in fact data is transferred from one port to another. The port setting of this page is asking
the user to choose which port to transfer the data going to the web server.
7.2.2 WIFI Setting
To Next Page
Loading...
