Figure 38
2) The Settings to Use Safari in MAC OS
When using MAC OS, because QuickTime is the default software, user only need go to
Utilities folder under the Applications folder, and start command line program (Terminal
program), input the command as:
qtdefaults write TransportSettings HTTP 8081
Then open safari to view. If can’t view from safari, please try http://ip:port/mobile.html .
8.4 Multi Device Monitor System
Multi Device Monitor System is a free software offered, several devices on LAN and
WAN can be browsed at the same time. The software also support snap, video record
and so on. The below Figure 39 is the interface.
To Next Page
Loading...
