1. Select the Server Name by clicking on Remove check box
2. Click Remove button
10.1.4 Linksys E1500 Router
1. Open your browser.
2. Type-in 192.168.1.1 on the address bar and then press Enter.
3. Type correct Username and Password if required.
4. Go to Applications & Gaming, click Single Port Forwarding
5. Select Application Name if application is available in one of the option and fields will
auto-populate. Select HTTP.
6. For External Port Start and External Port End, enter the port or ports that you want
to open. If you want to open one port, enter the same port in both boxes
7. For Protocol, select TCP.
8. For IP Address, input the IP Address of your camera.
9. Tick Enabled to activate the setting.
10. Click SaveSettings.
To Next Page
Loading...
