Need help?Do you have a question about the B & G Vulcan Series and is the answer not in the manual?
General| Touchscreen | Yes |
|---|---|
| Waterproof Rating | IPX7 |
| GPS | Yes |
| Chartplotter | Yes |
| Display Size | 7-inch or 9-inch |
| Connectivity | NMEA 2000 |
| Routes | 500 |
| Cartography | Navionics, C-MAP |
| Radar Integration | Yes |
| Sonar Integration | Yes |
Provides quick access to basic system settings via a dialog.
Details the procedure for powering the system on and off.
Steps to create and save custom page layouts.
How to create a Man Overboard waypoint and its automatic actions.
Overview of the chart panel elements and their functions.
Using the cursor to measure distances on the chart.
Searching for chart items or vessels on the chart.
Definition and use of waypoints for marking positions.
Steps to save a new waypoint at a selected or current position.
Steps to create a new route by placing routepoints.
How to start navigation to a selected cursor position.
Initiating navigation along a predefined route.
Setting up autopilot for navigation mode.
Composite view of key sailing data relative to the yacht's bow.
Important warnings and considerations for safe autopilot use.
Steps to activate the autopilot from any panel.
Explanation of the Echosounder display and its components.
Details the StructureScan panel's DownScan and side scanning views.
Explanation of the ForwardScan sonar display.
Steps to connect to and disconnect from a wireless hotspot.
How the system monitors for dangerous situations and system faults.
Setup and configuration of all alarms in the Alarms Settings dialog.
Provides access to application and system settings.
To Next Page