7
User Manual v1.4.3
HYDRODIGIT
It is possible to change the configuration parameters into Walk-By mode with an USB to IR interface (B
METERS mod. UC-Cable) and the B Metering software.
Walk by mode parameters:
• Transmission frequency: every 60 seconds (current values).
• Transmission span: Every day from 6 to 20.
• Encryption: enabled/disabled.
• Historical Data (12 months).
• Transmitted data: Volume, actual date and hour, reverse flow, alarms, leakage date, fraud date (Qmax
overflow or Backward flow detection).
Wireless MBUS OMS v4 (COMBO, output conguration Wireless MBUS OMS v4 only)
As soon as radio operation mode is activated, the meter sends a radio telegram according to Wireless
MBUS OMS v4, T1 mode (unidirectional transmission).
Preconfigured Radio parameters (AMR Mode):
• Transmission frequency: every 200 seconds (current values).
• Transmission span: Every day, from 0 to 24 h.
• Encryption: disabled (default).
• No historical data.
• Transmitted data: Volume, actual date and hour, reverse flow, alarms.
It is possible to change the configuration parameters into Walk-By mode with an USB to IR interface (B
METERS mod. UC-Cable) and the B Metering software
• Transmission frequency: configurable (minimum 60 seconds).
• Transmission interval: from Monday to Sunday, maximum 12 hours per day (time slot can be selected freely).
Possibility to select a 24-hours time slot with the following mandatory conditions:
Transmission frequency: > 300 seconds
Historical data disabled.
• Encryption: enabled/disabled.
• Historical data (12 months).
• Transmitted data (depends on the selected parameters): volume, date time, reverse flow, alarms, leakage
alarm, fraud alarm (Qmax overflow or backward flow detection).
LoRaWAN (COMBO, output conguration LoraWAN only)
As soon as radio operation mode is activated, the meter sends join requests to the Network Server where it
has been provisioned, according to LoRaWAN transmission standard.
During this process, the radio icon on the display will blink every second. If the procedure ends well, the icon
will remain on and stable, otherwise it will turn off.
To Next Page
Loading...
Need help?
General
