Baby Brezza formula pro mini

To Next Page

ACTIVATE

YOUR WARRANTY

www.babybrezza.co.uk/register

Scan here

Beneﬁts:

Faster customer support,

extended customer service

hours & more

Instructions

for set-up, use and cleaning

Customer Service

babybrezza.co.uk

Limited 1-Year Warranty

This product may be covered under one or more of the following including U.S. Patent No. 8,584,901,

Canada Patent No. 2,842,603, China Patent No. CN103874441, Australia Patent No. 2011374309, Spain Patent

No. ES2473790B2 and pending patent application(s) in the U.S. and other countries.

If you need help with your Baby Brezza Formula Pro® Mini in the UK or Ireland, visit www.babybrezza.co.uk or email

help@cheekyrascals.co.uk. Returns should be made to the store you purchased it from, but before you do, please rst contact

either Cheeky Rascals or Baby Brezza so that we can give you expert advice customised to your particular situation. Returns

cannot be accepted once powder and/or water has been added to the machine unless there is a fault covered by the Warranty.

The limited warranty is valid only on products bought through authorised resellers and used in the UK and Ireland. Buying

through an unauthorised reseller or using this product outside of the UK and Ireland automatically voids this warranty.

This warranty is available to consumers only. You are a consumer if you own a Baby Brezza Formula Pro® Mini that was

purchased at retail for personal, family or household use. Except as otherwise required under applicable law, this warranty is

not available to retailers or other commercial purchasers or owners. We warrant that your Baby Brezza Formula Pro® Mini will

be free of defects in material or workmanship under normal home use for one year from the date of original purchase when

used in accordance with the instructions and maintained correctly. Customer will be required to present original proof of

purchase in order to obtain the warranty benets. In the event that you do not have proof of purchase date, the purchase

date for purposes of this warranty will be the date of manufacture. If your Baby Brezza Formula Pro® Mini should prove to be

defective within the warranty period, we will repair it or, if we consider it necessary, replace it.

To obtain warranty services, in the UK or Ireland, please visit www.babybrezza.co.uk

Alternatively, contact help@cheekyrascals.co.uk

®



For use with tall bottles, a riser base is available to purchase at babybrezza.co.uk

Distributed in the UK & Ireland by Cheeky Rascals Ltd, Liss Mill, Mill Road, Liss,

Hampshire, GU33 7BD UK help@cheekyrascals.co.uk

For other EU countries, please contact: Gamin Tout Terrain, 52 rue Edouard Pailleron,

75019 Paris, France babybrezza@gamin-tout-terrain.com

Baby Brezza Enterprises LLC 250 Passaic St, Newark, NJ 07104

Main Page

Need help?

Do you have a question about the Baby Brezza formula pro mini and is the answer not in the manual?

Summary

Essential Safeguards for Babys Health

Initial Setup Steps

Rinse the Machine

Thoroughly clean all surfaces that come into contact with the machine and components before first use.

Clean Removable Parts

Wash all removable parts, except the base, in hot soapy water and allow to air dry completely.

Assemble Formula Pro Mini

Assemble the funnel, funnel cover, axle, measuring wheel, locking cover, and stirring wheel correctly.

Add Formula Powder

Fill the powder container between the 'MIN' and 'MAX' lines and secure the lid clockwise.

Drip Tray Set-up

Position the drip tray to ensure the bottle fits correctly under the funnel.

Set Up Controls

Configure powder settings, water volume, and understand the control panel functions.

Prepare Your First Bottle

Select formula setting, water volume, and press start to dispense formula.

Easy Daily Cleaning Instructions

Monthly Descaling Instructions

Long Term Storage Instructions

The Baby Brezza Formula Pro® Mini is an innovative, on-demand baby formula maker designed to simplify bottle preparation, especially for parents on the go. This compact machine automatically mixes formula powder and water to the perfect consistency and temperature, saving time and reducing frustration.

Function Description:

The Formula Pro® Mini's primary function is to dispense a pre-measured amount of formula powder and water, mixed together, into a baby bottle. It features a Powder Container where formula powder is stored, and a Water Tank for water. Users select a powder setting (1-10) corresponding to their specific formula brand and type, which can be found on the Baby Brezza website. They also select the desired water volume (60, 90, 120, 180, 240, or 300 ml). The machine then dispenses the mixed formula at body temperature. The water heating function ensures the water reaches an optimal temperature, indicated by a flashing temperature icon that becomes solid once the desired temperature is reached. The machine is designed for immediate consumption of the prepared milk and does not heat water to 70°C or above. It also includes safety features such as a locking lid for the Powder Container and a requirement for the Funnel to be properly inserted for operation.

Usage Features:

Before first use, or after a period of disuse, the machine requires a thorough rinse and cleaning of all removable parts. This involves washing the Water Tank, Water Tank Lid, Funnel, Funnel Cover, Stirring Wheel, Locking Cover with Silicone Scraper, Measuring Wheel, and Powder Container in hot soapy water and air drying them. It's crucial not to wash any parts in a dishwasher, steriliser, or microwave. After cleaning, the machine is assembled by placing the Axle on the Base, then the Powder Container with its printed markings facing the user. The Measuring Wheel fits over the Axle, followed by the Locking Cover, which snaps onto the Measuring Wheel. Finally, the Stirring Wheel is pushed down firmly onto the Axle until it clicks.

To operate, the Water Tank is filled with bottled water suitable for infant formula preparation or pre-boiled water cooled to room temperature (45°C or below). The machine is then plugged in, and the LCD screen will light up. Users select the appropriate powder setting and water volume using the respective buttons on the Control Panel. The "ml" button can also be pressed and held for 5 seconds to switch to ounces (1 ounce is equivalent to 30ml). Once settings are chosen, pressing the "Start" button initiates the dispensing process. The machine will automatically stop when dispensing is complete. The Drip Tray can be adjusted to two positions to accommodate different bottle sizes. For tall bottles (240ml or larger), a riser base is available for separate purchase. The machine remembers the selected setting and ml size even when unplugged.

Warning symbols on the LCD display alert users to various conditions: "Powder Lid Open" indicates the Powder Container Lid is not closed correctly; "Low Water" prompts refilling the Water Tank; "Clean Funnel" illuminates after every 4 bottles, requiring the Funnel assembly to be removed, washed, and dried; and "Funnel Out" signifies that the Funnel is not inserted completely. The machine will not operate if any of these symbols are illuminated.

Maintenance Features:

Regular cleaning is essential for the proper function and hygiene of the Formula Pro® Mini.

Daily Cleaning: The Funnel and Funnel Cover must be cleaned after every 4 bottles. This involves removing them, washing with warm soapy water, rinsing well, and air drying completely. Additionally, the Powder-Dispensing Hole on the underside of the Powder Container should be wiped with a dry paper towel or soft dry cloth. A spare Funnel and Funnel Cover can be purchased to facilitate daily cleaning by allowing users to swap a clean set for the one needing cleaning.
Monthly Cleaning: Once a month, a more thorough cleaning is required. All removable parts (Powder Container parts, Funnel, Funnel Cover, Drip Tray, Water Tank, and Water Tank Lid) should be hand washed with warm soapy water, rinsed, and air dried.
Monthly Descaling: To prevent mineral scale build-up in the water heater, a monthly descaling process is necessary. This involves removing all formula powder, emptying the Water Tank, and filling it with 400ml of purified water and 400ml of distilled vinegar. The machine then dispenses two 300ml cycles of this solution. After letting the machine sit for 4 hours, the Water Tank is washed, rinsed, and refilled with sterile or pre-boiled cooled water. The machine then runs multiple 300ml cycles of clean water until the "Low Water" indicator turns on, signifying that the tank is rinsed.

For long-term storage, the machine requires a complete cleaning, removal of all formula powder residue, and following specific descaling steps. The Water Tank is then removed, and the Base is turned upside down to drain any remaining water from the vent hole. All parts are air-dried and reinstalled before packing the machine for storage. Troubleshooting information is provided in the manual to address common issues such as the machine not starting, incorrect formula temperature, or dispensing problems, with clear remedies for each.