Why is fabric not feeding through my Baby Lock Sewing Machine?
If the fabric does not feed through your Baby Lock Sewing Machine: * Ensure the feed dogs are not lowered; slide the drop feed lever to the right. * If the stitch is too fine, lengthen the stitch length. * Attach the presser foot appropriate for the stitch you are using. * Remove any tangled thread, especially in the bobbin case, and clean the race if necessary.
Why is my Baby Lock Sewing Machine making a high-pitched noise?
If your Baby Lock Sewing Machine is making a high-pitched noise while sewing: * Clean the race to remove any dust accumulated in the feed dogs or bobbin case. * Ensure the upper thread is correctly threaded. * If the bobbin case is scratched or has a burr, contact your authorized retailer to replace it. * Use a bobbin designed specifically for your machine.
Why is fabric wrinkling when sewing with my Baby Lock A-LINES Sofia BL137A Sewing Machine?
If the fabric is wrinkling while using your Baby Lock Sewing Machine, try the following: * Ensure the upper thread is correctly threaded and the bobbin is correctly installed. * Make sure the spool is correctly installed. * Use the correct combination of fabric, thread, and needle. * Replace the needle if it's bent or blunt. * If sewing thin fabrics, shorten the stitch length or use a stabilizer. * Adjust the upper thread tension.
Why is my Baby Lock A-LINES Sofia BL137A not working?
If your Baby Lock Sewing Machine isn't operating, there are several potential causes: * The machine might not be turned on, so ensure it is switched on. * The start/stop button may not have been pressed; try pressing it. * The presser foot lever could be raised; lower it. * If the foot controller is connected, avoid using the start/stop button; disconnect the foot controller to use the button. * The bobbin winder shaft may be on the right side after winding the bobbin; slide it to the left.
What to do if lower thread is tangled in Baby Lock Sewing Machine?
If the lower thread is tangling or breaking on your Baby Lock Sewing Machine: * Ensure the bobbin thread is correctly installed. * Remove any tangled thread and clean the race. * Use a bobbin designed specifically for your machine.
What to do if upper thread keeps breaking on Baby Lock A-LINES Sofia BL137A?
If the upper thread is breaking on your Baby Lock Sewing Machine, consider the following: * Ensure the upper thread is correctly threaded, paying attention to the spool installation and using the correct spool cap size. * Select a needle appropriate for the thread being used. * Loosen the upper thread tension. * Replace the needle if it is bent or blunt. * If the presser foot or bobbin case are scratched or have burrs, contact your authorized retailer to replace them. * Make sure to use a bobbin designed specifically for your machine.
How to prevent needle from breaking on Baby Lock A-LINES Sofia BL137A?
There are several reasons why the needle might break on your Baby Lock Sewing Machine: * The needle may be incorrectly installed, so ensure it is correctly installed. * The needle could be bent or blunt, in which case you should replace it. * The combination of fabric, thread, and needle may not be correct; select a thread and needle appropriate for the fabric. * The presser foot may not be appropriate for the stitch; attach the correct presser foot. * The upper thread tension may be too tight; loosen it. * The spool may be incorrectly installed; correctly install the spool. * Using an incorrect bobbin can cause issues; only use a bobbin designed for your machine. * The upper thread may not be threaded correctly; correct the upper threading.
How to wind bobbin thread neatly on Baby Lock A-LINES Sofia BL137A?
If the bobbin thread isn't winding neatly on the bobbin of your Baby Lock Sewing Machine: * Ensure the thread is correctly passed through the bobbin-winding thread guide. * If the bobbin spins slowly, move the sewing speed controller to the right to increase the speed. * Wind the thread that was pulled off around the bobbin five or six times clockwise.
Crucial preliminary information for safe and proper machine usage.
Detailed safety guidelines to prevent accidents, injuries, and damage.
Highlights of the machine's capabilities, including thread cutting and USB connectivity.
Lists all accessories that come with the machine and those available for purchase.
Identification of machine parts, operation buttons, and the control panel.
Instructions for powering the machine on/off, power precautions, and using the LCD.
Procedures for winding the bobbin and threading the upper thread.
Guidance on replacing, selecting needles, and managing presser feet.
Method for sewing cylindrical pieces like sleeves and pant legs.
Step-by-step guide for basic sewing operations.
How to choose stitches, adjust width, length, and tension.
Features like automatic reverse/reinforcement and thread cutting.
Advice for achieving better results in various sewing situations.
Comprehensive table detailing stitch applications, settings, and presser feet.
Techniques for overcasting fabric edges and performing basic stitches.
Guides for blind hem, buttonholes, zippers, stretch fabrics, and decorative stitches.
Guidelines for fabric, thread, needles, and attaching units/frames.
How to choose, adjust, and manage embroidery designs.
Step-by-step instructions for embroidering patterns and creating appliqués.
Saving, retrieving patterns, and transferring data via computer.
Steps for cleaning the machine surface and race to ensure optimal performance.
Solutions for machine malfunctions, errors, and operational problems.
Instructions for downloading and installing software updates from the website.
General| Type | Computerized Sewing Machine |
|---|---|
| Buttonhole Styles | 10 |
| Needle Position | Variable |
| Feed System | Drop Feed |
| Maximum Stitch Width | 7 mm |
| Maximum Stitch Length | 5 mm |
| Weight | 12.3 lbs |
| Bobbin Type | Top Loading |
| Needle Threader | Automatic |
| Free Arm | Yes |
To Next Page