Overcasting Stitches
S-12
Sewing overcasting stitches using zigzag foot
“J”
* Stitch patterns can be selected directly by pressing the
numeric keys on the machine during preset utility stitch
mode. Refer to “Basic operations” section.
a
Attach zigzag foot “J”.
b
Select a stitch.
c
Sew along the edge of the fabric with the needle
dropping off the edge at the right.
1 Needle drop point
1 Needle drop point
Sewing overcasting stitches using the side
cutter (sold separately with some models)
Using the side cutter, seam allowances can be finished
while the edge of the fabric is cut off. Five utility stitches
can be used to sew overcasting stitches with the side
cutter.
Side cutter
a
Remove the presser foot.
b
Hook the connecting fork of the side cutter onto the
needle clamp screw.
1 Connecting fork
2 Needle clamp screw
Stitch name Stitch
Presser foot
Stitch number
Zigzag stitch
08
*
J
Zigzag stitch (Right) 10
2 steps elastic zigzag
stitch
11
3 steps elastic zigzag
stitch
12
*
Overcasting stitch
16
17
18
19
• Thread the needle manually when using the side
cutter, or only attach the side cutter after
threading the needle using the needle threader.
Stitch name Stitch
Presser foot
Stitch number
With side cutter
20
S
21
22
23
24
b
a
To Next Page
Loading...
Need help?
General
