Bachmann Dynamis User Manual

Dynamis User Guide
14
[CANCEL] to cancel [ACCEPT] to accept
CONSIST TYPE
Scroll to choose UNIVERSAL or ADVANCED
Universal Consists are handled by the Dynamis unit
Advanced Consists are a decoder feature – check that the decoder you are using has
CV19 to allow this feature.
The consist indicator will now be showing against this locomotive
Each consist has it own place in the roster.
UNI C001
indicates consist 001 is universal
ADV C002
indicates consist 002 is advanced
[ACCEPT]
Each consist can be given a name
eg PAIR OF 20s or UP DASH 8s or TWO BR 218s
The consist can be controlled by:
Either consist address
or any of the individual locomotive addresses
Locomotive functions are controlled from the locomotive address.
2 . Removing a loco from a consist
Scroll through the roster to the locomotive.
Press [CONSIST]. The locomotive is removed and the consist indicator no longer
shows.
3 . Deleting a consist
Once empty, a consist record can be deleted

Bachmann Dynamis Specifications

General

Manufacturer	Bachmann
Product Name	Dynamis
Category	Control Systems
Display	LCD
Protocols Supported	DCC
Locomotive Control	Yes
Accessory Control	Yes
Wireless Control	Yes
Type	DCC System
Connectivity	Wireless
Compatibility	DCC Compliant Locomotives and Accessories
Programming Modes	POM