Bachmann Dynamis - Page 16

Dynamis User Guide
17
Some CVs are common to all decoders, eg CV 2 start speed or CV 29 configuration.
Others are specific to the decoder. The Handset shows the description of common
CVs.
EXAMPLE 1
To restrict the the maximum speed of a locomotive using Main Track programming
PROGRAM 4468
ON MAINTRACK
[ACCEPT]
POM CV 0
VAL 0 00000000
Set the value contained in CV5 to 20
POM CV 5 V HI
[<>VALUE]
VAL 20
[PROG] the chosen value is written to the decoder
[CV<>] to continue programming another CV or
[CANCEL] to return to menu
EXAMPLE 2
To set the locomotive to operate in reverse direction using Service Track
programming
Program 4468
ON SERVICETRACK
Set the value contained in the CV29 to 7 (adding 1 to first bit reverses direction)
POS CV 29 CFG
[<>VALUE]
VAL 7
[PROG] the chosen value is written to the decoder
[CV<>] to continue programming another CV or
[CANCEL] to return to menu