Dynamis User Guide
adopt the address. If necessary create a separate length of track powered by your
Dynamis for this purposes. Short addresses (“2-digit”) can be written to a decoder
using Main Track programming with other locomotives on the track.
The screen shows
LOC 0003 0:28
LOCOMOTIVE 0003
1
.
Changing the locomotive address
The locomotive address can be set in either of two ways
Service Track - all addresses 0001 to 9999
Main Track - short addresses 1 to 127 only
Using Main Track to change a short address to another short address
[MENU] -- scroll to
PROGRAM
[ACCEPT]
-- scroll to
WRITE ADDR 0003
ON MAINTRACK
[ACCEPT]
Screen shows
CHANGE ADDR LOC
WRITE ADDR 3
[BKSP] to delete existing address
Use alphanumeric keys or joystick to enter new address up to 127
CHANGE ADDR 0003
WRITE ADDR 68
Press [PROG] to write the new address
Both decoder and roster database are updated.
Using Service Track
[MENU] -- scroll to
PROGRAM
[ACCEPT]
-- scroll to
WRITE ADDR 0003
ON SERVICETRACK
[ACCEPT]
To Next Page
Loading...
