Service Kit Parts Installation
Page 5 June 2018 DSY-UM-02582-EN-04
3� Press the tab on the battery connector plug to release it from the P2 battery
connector socket�
4� Record the locations of all wiring connected to the CPU board�
5� Remove all wiring from the CPU board�
6� Remove the 4 screws holding the CPU board�
7� Pull the CPU board straight up to unhook the J1 terminal block from the pins of the
display board P1 connector�
8� Align the new CPU board J1 terminal block with the pins of the display board P1
connector� Gently press the boards together making sure not to bend the pins� Align
the screw holes in the housing with the screw holes of new CPU board�
9� Secure the new CPU board with 4 screws�
10� Attach the battery connector plug to the P2 battery connector socket on the new
CPU board�
11� Connect the wiring to the new CPU board�
12� Screw on the enclosure cover�
To Next Page
Loading...
